Rhino Pitcher Rinser - 600mm - Spinjet With Blender Attachment. NSF Certified


The RHPR600-S-BL is one of Rhino Coffee Gear's latest releases. This rinser kit features the standard Rhino 600mm Spinjet Pitcher Rinser with an additional Blender attachment for larger vessels and popular blender jugs such as Vitamix and Blendtec.

The RHPR600-S-BL also features the standard Rhino Spinjet Valve, which spins and sprays in a fast, sweeping action, easily removing stubborn waste from your vessel. Its low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused from static waste. The additional large actuator plate supports blender jugs and larger vessels such as plungers and milkshake cups.


  • Single drain tray
  • Rhino Spinjet Valve
  • Low profile body
  • Large drain outlet
  • Large actuator plate
  • Easy to clean
  • NSF Certified


  • 1x Sink
  • 1x Spinjet spray mech with star
  • 1x Hexagon grate
  • 1 x Rhino Rinser Blender Attachment
  • 1 x John Guest Hose Adapter (drain hose not included)


  • Dimensions: 231mm / 9.09in (W) x 354mm / 13.94in (L) 185mm / 7.28in (D) approx. (Height inclusive of RHBRM Riser)
  • Materials: Stainless Steel
  • Drain Hose Size: 25mm/1 inch (not included)

Installation Information:

  • Depth Requirements: The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
  • Installation: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into benchtop surfaces. Bombora does not take responsibility for installation cut out errors and provides the sizes and dimensions as a layout guide only.
  • It is recommended that a Pressure Limiting Valve (PLV) is used when installing on the mains water line. 

Warranty Information:

  • 12 months Limited Warranty from the date of original purchase.
  • Warranty Exclusions:
    1. Excludes the cost of any associated labour.
    2. Standard maintenance on normal wear and tear parts including springs and seals. Replacement spare parts kit #RHSPVSK-01.
    3. Damage or fault due to misuse or incorrect installation.
    4. Defects that occur due to improper handling or poor water quality.

Don't forget these...